Rusty parts cleaning

Most of our brushes can be used for cleaning rusty surfaces, so it is wise to choose the most appropriate brush type.

If you need a higher removal capacity, instead of higher pressure on the brush, we suggest the following:

  • Use a more aggressive brush, a brush with a thicker wire, with less trim length or twist knot wire instead crimped wire.
  • Increase the brushing speed with a model who can work faster or with a bigger diameter, in the case of the wheel brushes.

Crimped wire brushes, because of their higher flexibility, are appropriate to work on uneven surfaces and they obtain a more regular and fine finishing. Twist knot wire offers longer life and a higher removal capacity but a more rough finishing.

Important

In order not to contaminate stainless steel surfaces, they are brush off with stainless steel wire brushes.
In those applications where fire is dangerous and so sparking is forbidden, the use of brass as anti-sparking wire is highly recommended.

More suitable products for this application

Image
Mod. CAM Knot of 10 mm (3/8")
Image
Mod. TA
Image
Mod. TCA High Performance Range
Image
Mod. CCA High Performance
Image
Mod.CCO Light Removal Brushing
Image
Mod. BDER Shank of 6 mm (1/4mm)
Image
Mod. BTE 1/4" Shank
Image
Mod. BCC with Shank of 6 mm
Image
Mod. CAE with Shank of 6 mm (1/4")
Image
Mod. BDOR Arbor hole of 13mm
Image
Mod. AL With 6 mm Shank
Image
Mod. L1F L1 with Simple Spiral
Image
Mod. CCT Heavy Removal Brushing
Image
Crimped / Knotted
Image
Mod. L-1 / L-2 L1 with Simple Spiral, L2 with Double Spiral
Image
Mod. CAM Knot of 10 y 12 mm (3/8" y 1/2)
Image
Mod. CT With Threaded Nut

Contact us and tell us how we can help you

Contact us and tell us how we can help you. Consult us if you want to have more information related to our services or you want us to advise you about how they can fit to your firm´s needs.

I have read and agree the privacy policy