Twist Knot Cup Brushes with shank offer high removal capacity using a drill with a conventional drill chuck
Measures
Model | Ext. Diameter (d) | Trim Length (s) | Code | ||
---|---|---|---|---|---|
mm | " | mm | " | ||
BTER | 65 | 2.3/4” | 20 | 11/16” | BTER 0065K |
Technical Specifications
Finishing grade
Ø Wire | Finishing | Grade |
---|---|---|
0,8-0,6-0,5 | Coarse | W1 |
0,4-0,37-0,35-0,30 | Medium | W2 |
0,20-0,15-0,12-0,10 | Fine | W3 |
0,08-0,06 | S. Fine | W4 |
Non-Abrasive Fibers | Neutral | SW5 |
Removal rate
Ø Wire | |
---|---|
0,8-0,6-0,5 | |
0,4-0,37-0,35-0,30 | |
0,20-0,15-0,12-0,10 | |
0,08-0,06 | |
Flexibility
DLZ, FLAP, Encapsulated brushes | |
Twist knots, Control brushes | |
Crimped wire .020 to .012 | |
Crimped wire .010 to .004 | |
Crimpe wire .003 to .002 Nylon & synthetic fibers | |
By adding a shank to the new BTER we provide the advantage of a brush with high removal capacity using a conventional drill chuck