Agressive Twist Knot Wheel Brushes offer long working life, high removal capacity and the possibility of working at high speed.
Measures
| Outside diameter (d) | Nº of Knots | Knot Width (a) | Trim Length (s) | Arbor / Hole (e) | Grey Steel | Stainless | Brass | R.P.M. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | " | mm | " | mm | " | 0,50 mm / .020" | 0,50 mm / .020" | 0,40 mm / .016" | Max. | ||
| 150 | 6" | 24 | 10 | 3/8" | 34 | 1.3/8" | 13-16-22 (1/2"-5/8"-7/8") | 1501K | 1501Q | 1501X | 9.000 |
| 175 | 7" | 24 | 10 | 3/8" | 46 | 1.3/4" | M14 W5/8" UNC Multi R (1) | 1701K | 1701Q | 1701X | 8.500 |
(1) Exclusive design for M14 x 2 and W5/8"-11 (Code R-88) or for M10 x 1,25 y M10 x 1,50 (Code R-77).
Technical Specifications
Finishing grade
| Ø Wire | Finishing | Grade |
|---|---|---|
| 0,8-0,6-0,5 | Coarse | W1 |
| 0,4-0,37-0,35-0,30 | Medium | W2 |
| 0,20-0,15-0,12-0,10 | Fine | W3 |
| 0,08-0,06 | S. Fine | W4 |
| Non-Abrasive Fibers | Neutral | SW5 |
Removal rate
| Ø Wire | |
|---|---|
| 0,8-0,6-0,5 | |
| 0,4-0,37-0,35-0,30 | |
| 0,20-0,15-0,12-0,10 | |
| 0,08-0,06 | |
Flexibility
| DLZ, FLAP, Encapsulated brushes | |
| Twist knots, Control brushes | |
| Crimped wire .020 to .012 | |
| Crimped wire .010 to .004 | |
| Crimpe wire .003 to .002 Nylon & synthetic fibers | |
- The twist knot wire allows:
- Long working life.
- High removal capacity.
- Possibility of working at high speed.
- Exclusive design and patented multifitting thread in two different versions; one is valid for M14 and 5/8-11 attachments (Code R88); the other is valid for M10 x 1,5 and M10 x 1,25 systems (Code R77).
- The new design is also extended to single threads. It allows an easier attachment and increases resistance resulting in more safety for the user.
