Wheel Brushes with shank are used in difficult places to access, holes, corners. Used on portable or fixed drills with chuck of 6 mm.
Measures
| Diameter (d) | Trim Length (s) | Face Width (a) | Coated Steel | Stainless | Brass | R.P.M. | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | " | mm | " | mm | " | 0,20 mm / .008" | 0,30 mm / .012" | 0,20 mm / .008" | 0,30 mm / .012" | 0,30 mm / .012" | Max. |
| 30 | 1.3/16" | 4 | 5/32" | 10 | 3/8" | 3000C | 3000N | 20.000 | |||
| 30 | 1.3/16" | 4 | 5/32" | 15 | 5/8" | 3015C | 3015N | 20.000 | |||
| 40 | 1.9/16" | 9 | 3/8" | 10 | 3/8" | 4000C | 4000N | 20.000 | |||
| 40 | 1.9/16" | 9 | 3/8" | 15 | 5/8" | 4015C | 4015N | 20.000 | |||
| 50 | 2" | 9 | 3/8" | 10 | 3/8" | 5000C | 5000N | 15.000 | |||
| 50 | 2" | 9 | 3/8" | 15 | 5/8" | 5015C | 5015N | 15.000 | |||
| 50 | 2" | 9 | 3/8" | 20 | 3/4" | 5020C | 5020N | 15.000 | |||
| 50 | 2" | 9 | 3/8" | 10 | 3/8" | 5000C | 5000N | 15.000 | |||
| 50 | 2" | 9 | 3/8" | 15 | 5/8" | 5015C | 5015N | 15.000 | |||
| 50 | 2" | 9 | 3/8" | 20 | 3/4" | 5020C | 5020N | 15.000 | |||
| 50 | 2" | 9 | 3/8" | 25 | 1" | 5025C | 5025N | 15.000 | |||
| 60 | 2.3/8" | 16 | 5/8" | 10 | 3/8" | 6010E | 6010Z | 15.000 | |||
| 60 | 2.3/8" | 16 | 5/8" | 15 | 5/8" | 6000E | 6000Z | 6000V | 15.000 | ||
| 60 | 2.3/8" | 16 | 5/8" | 20 | 3/4" | 6020E | 6020Z | 15.000 | |||
| 60 | 2.3/8" | 16 | 5/8" | 25 | 1" | 6025E | 6025Z | 15.000 | |||
| 75 | 3" | 23 | 7/8" | 10 | 3/8" | 7510E | 7510Z | 15.000 | |||
| 75 | 3" | 23 | 7/8" | 15 | 5/8" | 7500E | 7500Z | 7500V | 15.000 | ||
| 75 | 3" | 23 | 7/8" | 20 | 3/4" | 7520E | 7520Z | 15.000 | |||
| 75 | 3" | 23 | 7/8" | 25 | 1" | 7525E | 7525Z | 15.000 | |||
| 100 | 4" | 30 | 1.3/16" | 15 | 5/8" | 1000E | 1000Z | 1000V | 15.000 | ||
Technical Specifications
Finishing grade
| Ø Wire | Finishing | Grade |
|---|---|---|
| 0,8-0,6-0,5 | Coarse | W1 |
| 0,4-0,37-0,35-0,30 | Medium | W2 |
| 0,20-0,15-0,12-0,10 | Fine | W3 |
| 0,08-0,06 | S. Fine | W4 |
| Non-Abrasive Fibers | Neutral | SW5 |
Removal rate
| Ø Wire | |
|---|---|
| 0,8-0,6-0,5 |
|
| 0,4-0,37-0,35-0,30 |
|
| 0,20-0,15-0,12-0,10 |
|
| 0,08-0,06 |
|
Flexibility
| DLZ, FLAP, Encapsulated brushes |
|
| Twist knots, Control brushes |
|
| Crimped wire .020 to .012 |
|
| Crimped wire .010 to .004 |
|
| Crimpe wire .003 to .002 Nylon & synthetic fibers |
|
