End Brushes without shank are used in manual and automatic machines for deburring tubes and profiles.
Measures
| Model | D | T | L | Pack | Coated Steel | Stainless | Abrasive Nylon | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | " | mm | " | mm | " | 0,20 mm / .008" | 0,50 mm / .020" | 0,20 mm / .008" | 0,50 mm / .020" | Grado 120 | Grado 180 | ||
| BC | 25 | 1" | 95 | 3.74" | 25 | 1" | 16 | 92656CSE | 921696HSE | 92696NSE | 92696QSE | 92696120SE | 92696180SE |
Technical Specifications
Finishing grade
| Ø Wire | Finishing | Grade |
|---|---|---|
| 0,8-0,6-0,5 | Coarse | W1 |
| 0,4-0,37-0,35-0,30 | Medium | W2 |
| 0,20-0,15-0,12-0,10 | Fine | W3 |
| 0,08-0,06 | S. Fine | W4 |
| Non-Abrasive Fibers | Neutral | SW5 |
| Abrasive Nylon | Finishing | Grade |
|---|---|---|
| Grit 20|40|60 | Coarse | NA1 |
| Grit 80|100|120 | Medium | NA2 |
| Grit 180|200|300 | Fine | NA3 |
| Grit 400|800|2000 | S. Fine | NA4 |
| Non-Abrasive Fibers | Neutral | SW5 |
Removal rate
| Ø Wire | |
|---|---|
| 0,8-0,6-0,5 |
|
| 0,4-0,37-0,35-0,30 |
|
| 0,20-0,15-0,12-0,10 |
|
| 0,08-0,06 |
|
| Nylon & Flap brushes | |
|---|---|
| Grit 20|40|60 |
|
| Grit 80|100|120 |
|
| Grit 180|200|300 |
|
| Grit 400|800|2000 |
|
| Non-abrasive Nylon |
|
Flexibility
| DLZ, FLAP, Encapsulated brushes |
|
| Twist knots, Control brushes |
|
| Crimped wire .020 to .012 |
|
| Crimped wire .010 to .004 |
|
| Crimpe wire .003 to .002 Nylon & synthetic fibers |
|
