Full

For harder Class III and Class IV type burrs. Deburring coarse burrs. Good for flat surfaces.

JAZ “CCM” brushes are mainly composed of nylon filaments impregnated with: Silicon carbide, aluminum oxide, diamond, ceramic coating, etc.

The “CCM” line is designed to be mounted as a tool for use in machining centers, robots, flexible cells, etc.

The “CCM” brushes provide a variety of solutions such as deburring, blending and finishing, rounding of edges, contouring of edges and refinement of surfaces.

Our abrasive filament brushes can be run dry (without a coolant), however applying a “coolant” to the abrasive filaments will improve the finish and performance of the tool.

Industries such as Automotive, Aeronautics, Sintered Metals, etc., where surface finishing is important, can find a solution to many surface finishing problems with JAZ “CCM” brushes.

Inquire with us about this product

I have read and agree the privacy policy

Measures

Outside Ø Ø Arbor Hole Saliente Silicium Carbide Diamond
Grit Grit
mm " mm " mm " 80 120 320 80 120 320
115 .4.1/2” 14 9/16” 25 1" CCM11580CSFL CCM11512CSFL CCM11532CSFL CCM11580DFL CCM11512DFL CCM11532DFL
150 6” 20 3/4” 30 1.3/16” CCM15080CSFL CCM15012CSFL CCM15032CSFL CCM15080DFL CCM15012DFL CCM15032DFL

 

Outside Ø Ø Arbor Hole Trun Lenght Ceramic Aluminium Ox.
Grit Grit
mm " mm " mm " 80 120 320 80 120 320
115 .4.1/2” 14 9/16” 25 1" CCM11580CRFL CCM11512CRFL CCM11532CRFL CCM11580OAFL CCM11512OAFL CCM11532OAFL
150 6” 20 3/4” 30 1.3/16” CCM15080CRFL CCM15012CRFL CCM15032CRFL CCM15080OAFL CCM15012OAFL CCM15032OAFL

Technical Specifications

Finishing grade

Nylon Abrasivo Finishing Grade
Grit 20|40|60 Coarse NA1
Grit 80|100|120 Medium NA2
Grit 180|200|300 Fine NA3
Grit 400|800|2000 S. Fine NA4
Non-Abrasive Fibers Neutral SW5

Removal rate

Nylon & Flap brushes
Grit 20|40|60
Grit 80|100|120
Grit 180|200|300
Grit 400|800|2000
Non-abrasive Nylon

Flexibility

DLZ, FLAP, Encapsulated brushes
Twist knots, Control brushes
Crimped wire .020 to .012
Crimped wire .010 to .004
Crimpe wire .003 to .002 Nylon & synthetic fibers
  • Action: Finishing
  • Tool: Industrial machines
  • Surface: Stainless, Steel

Applications

  • For harder Class III and Class IV type burrs.
  • Deburring coarse burrs.
  • Good for flat surfaces.

Sectores_ingl

  • Industry: Engineering, Aeronautics, Automotive, Sintered Metals.

Additional information

Tool Holder for CCM Brushes

  • For the correct mounting of CCM brushes in CNC machines, we recommend to use the Tool Holder.
  • The Tool Holder is designed to provide the best performance of CCM brushes.
  • Manufactured in one solid piece to improve the balancing and the life of the tool.
  • The design allows the coolant to flow through the Tool Holder, reducing the heating and also avoiding rust corrosion.

Class of Burr

  • CLASS I
    Micro Burrs can only be seen with magnification.
  • CLASS II
    Feather Burrs can be seen without magnification. They can be removed with your fingernail.
  • CLASS III
    Well attached small burrs are small in nature, but require a lot of force to be removed.
  • CLASS IV
    Well attached large burrs are large in nature and have a larger attachment point than a CLASS 111 burr.
  • CLASS V
    Extruded burrs are very large burrs that extrude from the base material. These burrs need to be preconditioned before brushing.