Nylon Abrasive DIY brushes do not scratch and therefore they are appropriate for cleaning and polishing wood, metallic surfaces, tile, stone, concrete, plastic materials, stainless steel or aluminum.
Measures
| Type | Ø Diameter | Filament | Packing | R.P.M. Max. |
P.C.S. per Box |
|||
|---|---|---|---|---|---|---|---|---|
| mm | " | Color | Grit | Bulk | Display | |||
| Wheel | 75 | 3" | Rojo | 80 | 7500 | 9475 | 4.500 | 12 |
| Azul | 150 | 7501 | 9575 | 4.500 | 12 | |||
| 100 | 4" | Rojo | 80 | 1000 | 9410 | 4.500 | 12 | |
| Azul | 150 | 1001 | 9510 | 4.500 | 12 | |||
| Cup | 50 | 2" | Rojo | 80 | 5000 | 9450 | 4.500 | 12 |
| Azul | 150 | 5001 | 9550 | 4.500 | 12 | |||
| 75 | 3" | Rojo | 80 | 7000 | 9470 | 4.500 | 12 | |
| Azul | 150 | 7001 | 9570 | 4.500 | 12 | |||
| End Brush | 25 | 1" | Rojo | 80 | 2200 | 9422 | 4.500 | 12 |
| Azul | 150 | 2201 | 9522 | 4.500 | 12 | |||
| Flap | 100 | 4" | Rojo | 80 | 1600 | 9416 | 4.500 | 12 |
| Azul | 150 | 1601 | 9516 | 4.500 | 12 | |||
Technical Specifications
Finishing grade
| Abrasive Nylon | Finishing | Grade |
|---|---|---|
| Grit 20|40|60 | Coarse | NA1 |
| Grit 80|100|120 | Medium | NA2 |
| Grit 180|200|300 | Fine | NA3 |
| Grit 400|800|2000 | S. Fine | NA4 |
| Non-Abrasive Fibers | Neutral | SW5 |
Removal rate
| Nylon & Flap brushes | |
|---|---|
| Grit 20|40|60 |
|
| Grit 80|100|120 |
|
| Grit 180|200|300 |
|
| Grit 400|800|2000 |
|
| Non-abrasive Nylon |
|
Flexibility
| DLZ, FLAP, Encapsulated brushes |
|
| Twist knots, Control brushes |
|
| Crimped wire .020 to .012 |
|
| Crimped wire .010 to .004 |
|
| Crimpe wire .003 to .002 Nylon & synthetic fibers |
|
- Brushes made of nylon filaments impregnated with Aluminium Oxide abrasive particles.
- High flexibility without danger of breaking, providing long working life and increased safety.
- Suitable for dry applications only.
- To be used in power drills.
- Red colour nylon brushes (grit 80) produce a coarse finishing; the blue colour ones (grit 150) provide a fine polishing.
Applications
Nylon brushes do not scratch and therefore they are appropriate for cleaning and polishing of:
Additional information
Operating Recommended Speed
Optimum performance is obtained at the recommended working speed 2.500 R.P.M.
Speeds above the recommended ones may smear the workpiece due to heat build-up.
