Flexible Hone

SKU: Mod. FH

The FH is a flexible abrasive tool ideal for lapping, deburring cylinders, hydraulic elements, aluminum injection parts, automotive, precision parts, etc

Tool composed of small and independent unbreakable balls tied to the center by nylon strips. It is self-centering and adjustable, so you can adapt it to any unevenness of the surface of the hole to work. Reduces the values ​​of RA, but keeping Rpk Rk and Vo and keeps Rvk and volume. Achieving a perfect polished. You can attach it, in manual and automatic machine drills.

This tool is ideal for cylinders, connecting rods, crankshafts tooling…

Inquire with us about this product

I have read and agree the privacy policy

Measures

Ø Diameter of the cylinder to clean Total Length Useful length SC Grit SC Grit
mm " mm " mm " 120 180
4 .157" 150 6" 21 5.9"   04SC18
8 .315" 203 8" 53 2.1/4" 08SC12 08SC18
9 .354" 203 8" 53 2.1/5" 09SC12 09SC18
10 .394" 203 8" 53 2.1/6" 10SC12 10SC18
12,7 1/2" 203 8" 65 2.1/7" 13SC12 13SC18
14 .552" 203 8" 65 2.1/8" 14SC12 14SC18
16 5/8" 203 8" 65 2.1/9" 16SC12 16SC18
18 .709" 203 8" 65 2.1/10" 18SC12 18SC18
20 .787" 203 8" 65 2.1/11" 20SC12 20SC18
22 7/8" 203 8" 65 2.1/12" 22SC12 22SC18
25,4 1" 203 8" 80 2.1/13" 26SC12 26SC18
29 1.1/8" 203 8" 80 2.1/15" 29SC12 29SC18
31,8 1.1/4" 203 8" 80 2.1/16" 32SC12 32SC18
35 1.3/8" 203 8" 80 2.1/17" 35SC12 35SC18
38 1.1/2" 203 8" 80 2.1/18" 38SC12 38SC18
41 1.5/8" 203 8" 80 2.1/19" 41SC12 41SC18
45 1.3/4" 203 8" 80 2.1/20" 45SC12 45SC18
48 1.7/8" 203 8" 80 2.1/21" 48SC12 48SC18
51 2" 203 8" 80 2.1/22" 51SC12 51SC18

Technical Specifications

Finishing grade

Nylon Abrasivo Finishing Grade
Grit 20|40|60 Coarse NA1
Grit 80|100|120 Medium NA2
Grit 180|200|300 Fine NA3
Grit 400|800|2000 S. Fine NA4
Non-Abrasive Fibers Neutral SW5

Removal rate

Nylon & Flap brushes
Grit 20|40|60
Grit 80|100|120
Grit 180|200|300
Grit 400|800|2000
Non-abrasive Nylon

Flexibility

DLZ, FLAP, Encapsulated brushes
Twist knots, Control brushes
Crimped wire .020 to .012
Crimped wire .010 to .004
Crimpe wire .003 to .002 Nylon & synthetic fibers
  • Action: Finishing, Polishing
  • Surface: Stainless, Steel
  • Tool: Drill

El alambre trenzado proporciona:

  • Tool composed of silicon carbide balls impregnated with different grits.
  • Can be used in dry surfaces or with oils having viscosity SAE 10 to 30 (it is recommended to lubricate).
  • Do not use solvents during use or for cleaning the cylinders.
  • For the choice of suitable diameter, this will be the inside diameter of the cylinder polish or the next higher.
  • The recommended speed is between 500 and 1200 rpm. Not to be used in high-speed engines.
  • Progress will be between 3 to 4.5 m / sec.
  • The oscillations for correct work will be 20 to 45 seconds per cylinder. (5-15 passes).
  • It is important that the tool gets into the hole and to be always in rotation
  • After work, and in order to remove any residue, use soapy water and a brush Nylon spiral (LNY) of the same diameter.
  • We have a wide range of dimensions, and abrasive grits outside the permanent stock table.

Applications

  • Air Compressors.
  • Air Hydraulic Cylinders.
  • Pneumatic Cylinders.
  • Boiler componets
  • Pneumatic Tools.
  • Brake Cylinder
  • Brake Rotors
  • Cylinders and Engine Blocks
  • Guns and Weapons
  • Musical Instruments

Order Example

Order example:

FH20SC12

  • Model: FH
  • Article code: 20SC12
  • Grit: 120
  • Diameter: 20mm