Abrasive Nylon End Brushes produce a consistent finish witout affecting surface measures. Suitable for wet and dry applications.
Measures
| Ø Outside Diameter | Trim Length (s) | Arbor Hole | Grit | R.P.M. Max. |
|||||
|---|---|---|---|---|---|---|---|---|---|
| mm | " | mm | " | mm | " | 120 (Coarse) | 180 (Medium) | 320 (Fine) | |
| 12 | 1/2" | 20 | 3/4" | 6 | 1/4" | 1201 | 1202 | 1203 | 20.000 |
| 19 | 3/4" | 30 | 1.3/16" | 6 | 1/4" | 1901 | 1902 | 1903 | 20.000 |
| 25 | 1" | 30 | 1.3/16" | 6 | 1/4" | 2501 | 2502 | 2503 | 20.000 |
Technical Specifications
Finishing grade
| Abrasive Nylon | Finishing | Grade |
|---|---|---|
| Grit 20|40|60 | Coarse | NA1 |
| Grit 80|100|120 | Medium | NA2 |
| Grit 180|200|300 | Fine | NA3 |
| Grit 400|800|2000 | S. Fine | NA4 |
| Non-Abrasive Fibers | Neutral | SW5 |
Removal rate
| Nylon & Flap brushes | |
|---|---|
| Grit 20|40|60 |
|
| Grit 80|100|120 |
|
| Grit 180|200|300 |
|
| Grit 400|800|2000 |
|
| Non-abrasive Nylon |
|
Flexibility
| DLZ, FLAP, Encapsulated brushes |
|
| Twist knots, Control brushes |
|
| Crimped wire .020 to .012 |
|
| Crimped wire .010 to .004 |
|
| Crimpe wire .003 to .002 Nylon & synthetic fibers |
|
Applications
Nylon brushes do not scratch and therefore they are appropriate for cleaning and polishing of:
Additional information
Operating Recommended Speed
Optimum performance is obtained at the recommended working speed 2.500 R.P.M.
Speeds above the recommended ones may smear the workpiece due to heat build-up.
