Chimney Cleaning KIT for Metal Duct Chimneys

Ideal for the internal cleaning of chimneys, improving efficiency and preventing possible accidents and fires.

The KIT contains:

  • 1 flat wire circular brush.
  • 4 polypropylene rods of 1.4 meters each one (5.6 meters total)

Inquire with us about this product

    I have read and agree the privacy policy


    Reference Description
    KIT125NY Chimney sweep steel 125 diam. + 4 rod 1.4 mts
    KIT150NY Chimney sweep steel 150 diam. + 4 rod 1.4 mts
    KIT200NY Chimney sweep steel 200 diam. + 4 rod 1.4 mts
    KIT250NY Chimney sweep steel 250 diam. + 4 rod 1.4 mts
    LCH125NY Chimney sweep steel 125 diam.
    LCH150NY Chimney sweep steel 150 diam.
    LCH200NY Chimney sweep steel 200 diam.
    LCH250NY Chimney sweep steel 250 diam.
    VAR1400 Rod 1.4 meters

    Technical Specifications

    Finishing grade

    Removal rate


    DLZ, FLAP, Encapsulated brushes
    Twist knots, Control brushes
    Crimped wire .020 to .012
    Crimped wire .010 to .004
    Crimpe wire .003 to .002 Nylon & synthetic fibers
    • Action: Cleaning
    • Tool: By hand

    Additional information

    Instrucciones de uso

    • STEP 1
      Protect the front of the chimney with paper or plastics.
    • STEP 2
      While using the brush and catcher, eliminate all the remains of ashes that remain in the home.
    • STEP 3
      Check inside the fireplace and, with a lantern, try to inspect the tube.
    • STEP 4.
      Seal the front of the chimney with 2 plastics but leaving an opening in the center. Use protective glasses, mask and gloves.
    • STEP 5
      Insert the brush little by little trying to scrape as much as possible, but carefully, so the conduit tubes stay connected. Unlock the handle to release the entire length of the pipe.
    • STEP 6
      When you can feel less internal resistance, you will have removed from the tube the majority of the waste. Remove the brush and carefully, remove the plastics.
    • STEP 7
      With the soot vacuum cleaner, pick up all the remains that have fallen. If you have it, check that the shot is free of waste and opens and closes freely. If not, vacuum it as well.
    • STEP 8
      Clean the entering/opening and the base of the chimney and your chimney will be ready until the following year. To keep it in good condition, do chemical cleanings and maintenance with wood and anti-soot bags, during the season of use.

    We advise to use gloves, protective glasses and a face mask during the chimney cleaning in order to avoid any kind of accident.