Abrasive Nylon Wheels

Abrasive Nylon Wheels produce a consistent finish witout affecting surface measures. Suitable for wet and dry applications.

Inquire with us about this product

    I have read and agree the privacy policy

    Measures

    Diameter Face Width Trim Length Arbor Hole Grits R.P.M. Max
    120 · Coarse 180 · Medium 320 · Fine
    4" 5/16" 11/16" 1/2", 5/8", 3/4", 7/8", 1-3/16" 21371 21370 21372 12,000
    4" 5/8" 11/16" 21771 21770 21772 12,000
    6" 1/2" 1-1/16" 1/2",5/8",3/4",7/8",1",1-3/16",2" 23371 23370 23372 6,500
    6" 1-1/18" 1-1/16" 23771 23770 23772 6,500
    7" 5/8" 1-5/8" 24371 24370 24372 6,500
    7" 1-1/8" 1-5/8" 24771 24770 24772 6,500
    8" 5/8" 1-5/8" 25371 25370 25372 6,000
    8" 1-1/8" 1-5/8" 25771 25770 25772 6,000
    10" 5/8" 1-3/4" 27371 27370 27372 5,000
    10" 1-1/8" 1-3/4" 27771 27770 27772 5,000
    12" 5/8" 2" 29371 29370 29372 4,500
    12" 1-1/8" 2" 29771 29770 29772 4,500

    DNA wheels are equipped with a multi fitting arbor hole bushing system fitting multiple arbor sizes.

    Technical Specifications

    Finishing grade

    Abrasive Nylon Finishing Grade
    Grit 20|40|60 Coarse NA1
    Grit 80|100|120 Medium NA2
    Grit 180|200|300 Fine NA3
    Grit 400|800|2000 S. Fine NA4
    Non-Abrasive Fibers Neutral SW5

    Removal rate

    Nylon & Flap brushes
    Grit 20|40|60
    Grit 80|100|120
    Grit 180|200|300
    Grit 400|800|2000
    Non-abrasive Nylon

    Flexibility

    DLZ, FLAP, Encapsulated brushes
    Twist knots, Control brushes
    Crimped wire .020 to .012
    Crimped wire .010 to .004
    Crimpe wire .003 to .002 Nylon & synthetic fibers
    • Action: Deburring, Finishing
    • Tool: Bench-Grinder
    • Surface: Stainless, Steel

    • Filaments impregnated with Silicon Carbide abrasive grains allow the brush to maintain a high cut rate while producing a consistent finish throughout the life of the brush.
    • Filaments flex to all angles, and permits them to deburr and finish highly contoured parts.
    • Nylon brushes are ideal when it is important that surface measures are not affected by the brushing process. Suitable for wet and dry applications.
    • Although coolants and lubrication may allow the use of higher speeds than initially recommended, these R.P.M. must never be exceeded.
    • Exclusive design and patented multifitting thread in two different versions; one is valid for M14 and 5/8-11 attachments; the other is valid for M10 x 1,5 and M10 x 1,25 systems.The new design is also extended to single threads. It allows an easier attachment and increases resistance resulting in more safety for the user.

    Applications

    Do not scratch and therefore they are appropriate for cleaning and polishing of:

    • Deburring of turbine blades and removing carbon encrustation from engines.
      Cleaning of dies, steel and cast iron pieces.
    • Deburring of cylindrical parts, steering gear cases and control pistons in the automotive industry.
    • Deburring of edges on aluminium extrusions, fabricated metals, powdered metals…

    Order Example

    JAZ ZUBIAURRE: Gráfica

    Order example:

    23371