Wood-working brushes for portable machines.
For an antique wood finish for flooring, roofing and furniture pieces, it is best to use a two-step process of steel wire brushes and nylon abrasive brushes.
Steel wires wear the softer parts of the wood and highlight the harder parts. For a finer finishing – removing burrs, sticks and chips resulting from the use of steel wire it is recommended of nylon abrasive brushes.
There is a wide variety of machines (COSTA, SCM, VOLPATO, GRIGGIO) that use roller brushes of steel wire and nylon abrasive filaments. These brushes are used in automated processes.
| Model | Outside Diameter | Face Width | Arbor Hole | Steel | Stainless Steel | Nylon Grit | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | " | mm | " | mm | " | 0.3mm | 0.12" | 0.3mm | 0.12" | 46 | 80 | |
| Makita | 100 | 4" | 120 | 4.3/4" | 12,7 | 1/2" | CT91030E13 | CT91030Z13 | CI10124613 | CI10128013 | ||
| Model | Outside Diameter | Face Width | Arbor Hole | Steel | Stainless Steel | Nylon Grit | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | " | mm | " | mm | " | 0.2mm | .008" | 0.2mm | .008" | 46 | 80 | |
| Festool | 150 | 6" | 85 | 3.5/16" | 16-30 | 5/8”-1.3/16” | CT91528C1630 | CT91528N1630 | CI1585461630 | CI1585461630 | ||
| Outside Diameter | Face Width | Inside Diameter | Steel | Stainless Steel | Nylon Grit | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| mm | " | mm | " | mm | " | 0.2mm / .008" | 0.3mm / .012" | 0.2mm / .008" | 46 | 80 |
| 100 | 4" | 70 | 2.3/4" | 19+2 CHRO 6X3 | 3/4”+2 Keyway 1/4-1/8 | CT91020C19 | CT91020E19 | CT91020N19 | ||
| 100 | 4" | 100 | 4" | 19+2 CHRO 6X3 | 3/4”+2 Keyway 1/4-1/8 | CT91028C19 | CT91028E19 | CT91028N19 | ||
| 100 | 4" | 70 | 2.3/4" | 19+2 CHRO 6X3 | 3/4”+2 Keyway 1/4-1/8 | CI10704619 | CI10708019 | |||
| 100 | 4" | 100 | 4" | 19+2 CHRO 6X3 | 3/4”+2 Keyway 1/4-1/8 | CI10104619 | CI10108019 | |||
| 100 | 4" | 120 | 4.3/4" | 19+2 CHRO 6X3 | 3/4”+2 Keyway 1/4-1/8 | CI10124619 | CI10128019 | |||
| DLZ, FLAP, Encapsulated brushes | |
| Twist knots, Control brushes | |
| Crimped wire .020 to .012 | |
| Crimped wire .010 to .004 | |
| Crimpe wire .003 to .002 Nylon & synthetic fibers | |
T. +34 943 120 600
info@jazsurface.com
Polígono Ind. Azitain, 4
20600 Eibar – Spain
T. 877.529.8721
59 Tarkiln Place
New Bedford, MA
02745 – USA
We support the Sustainable Development Goals
