Chimney cleaning KIT for Pellet Stoves

Ideal for the internal cleaning of chimneys, improving efficiency and preventing possible accidents and fires.

The KIT contains:

I have read and agree the privacy policy

Reference	Description
KIT080NY	3 meters flexible cable + Nylon circular brush 80mm diam.

DLZ, FLAP, Encapsulated brushes
Twist knots, Control brushes
Crimped wire .020 to .012
Crimped wire .010 to .004
Crimpe wire .003 to .002 Nylon & synthetic fibers

STEP 1
Protect the front of the chimney with paper or plastics.
STEP 2
While using the brush and catcher, eliminate all the remains of ashes that remain in the home.
STEP 3
Check inside the fireplace and, with a lantern, try to inspect the tube.
STEP 4.
Seal the front of the chimney with 2 plastics but leaving an opening in the center. Use protective glasses, mask and gloves.
STEP 5
Insert the brush little by little trying to scrape as much as possible, but carefully, so the conduit tubes stay connected. Unlock the handle to release the entire length of the pipe.
STEP 6
When you can feel less internal resistance, you will have removed from the tube the majority of the waste. Remove the brush and carefully, remove the plastics.
STEP 7
With the soot vacuum cleaner, pick up all the remains that have fallen. If you have it, check that the shot is free of waste and opens and closes freely. If not, vacuum it as well.
STEP 8
Clean the entering/opening and the base of the chimney and your chimney will be ready until the following year. To keep it in good condition, do chemical cleanings and maintenance with wood and anti-soot bags, during the season of use.

We advise to use gloves, protective glasses and a face mask during the chimney cleaning in order to avoid any kind of accident.

Inquire with us about this product