American Twist Knot Cup Brushes without bridle offer longer life, higher removal capacity and the possibility to work at high speed.
Measures
| Diameter (d) |
No. of Rows |
Trim Length (s) |
Arbor Hole (e) |
Steel | Stainless Steel | R.P.M. Max. |
|
|---|---|---|---|---|---|---|---|
| .014" | .020" | .020" | |||||
| 4" | 1 | 1" | 5/8"-11 | 54162 | 54152 | 54182 | 8,500 |
| 5" | 1 | 1" | 5/8"-11 | 55162 | 55152 | 55182 | 6,500 |
Technical Specifications
Finishing grade
| Ø Wire | Finishing | Grade |
|---|---|---|
| 0,8-0,6-0,5 | Coarse | W1 |
| 0,4-0,37-0,35-0,30 | Medium | W2 |
| 0,20-0,15-0,12-0,10 | Fine | W3 |
| 0,08-0,06 | S. Fine | W4 |
| Non-Abrasive Fibers | Neutral | SW5 |
Removal rate
| Ø Wire | |
|---|---|
| 0,8-0,6-0,5 |
|
| 0,4-0,37-0,35-0,30 |
|
| 0,20-0,15-0,12-0,10 |
|
| 0,08-0,06 |
|
Flexibility
| DLZ, FLAP, Encapsulated brushes |
|
| Twist knots, Control brushes |
|
| Crimped wire .020 to .012 |
|
| Crimped wire .010 to .004 |
|
| Crimpe wire .003 to .002 Nylon & synthetic fibers |
|
The twisted wire gives these models:
Designed for use in portable machines.
Suitable for brushing over large areas with a higher removal capacity.
Exclusively designed threaded M14 x 2 and W5 / 8 "-11 (Code R-88) or M10 x 1.25 and M10 x 1.50 (Code R-77). Also valid to single thread. It allows an easier attachment and increases resistance.



