TUFT

The TUFT model is used for a wide range of deburring degrees. Brushes with less density than other model types. There is more space between the abrasive filaments providing more flexibility when brushing.This characteristic provides more flexibility to adapt to complex surface geometries.Highly recommended for planetary machine, ideal for deburring flat parts.

JAZ «CCM» brushes are mainly composed of nylon filaments impregnated with: Silicon carbide, aluminum oxide, diamond, ceramic coating, etc.

The “CCM” line is designed to be mounted as a tool for use in machining centers, robots, flexible cells, etc.

The «CCM» brushes provide a variety of solutions such as deburring, blending and finishing, rounding of edges, contouring of edges and refinement of surfaces.

Our abrasive filament brushes can be run dry (without a coolant), however applying a “coolant” to the abrasive filaments will improve the finish and performance of the tool.

Industries such as Automotive, Aeronautics, Sintered Metals, etc., where surface finishing is important, can find a solution to many surface finishing problems with JAZ “CCM” brushes.

Consúltanos sobre este producto

He leído y acepto la política de privacidad

Medidas

Ø Exterior Ø Eje Saliente Carburo de Silicio Diamante
Grado Grado
mm " mm " mm " 80 120 320 80 120 320
115 .4.1/2” 14 9/16” 25 1" CCM11580CSTF CCM11512CSTF CCM11532CSTF CCM11580DTF CCM11512DTF CCM11532DTF
150 6” 20 3/4” 30 1.3/16” CCM15080CSTF CCM15012CSTF CCM15032CSTF CCM15080DTF CCM15012DTF CCM15032DTF

 

Ø Exterior Ø Eje Saliente Cerámico Ox. Aluminio
Grado Grado
mm " mm " mm " 80 120 320 80 120 320
115 .4.1/2” 14 9/16” 25 1" CCM11580CRTF CCM11512CRTF CCM11532CRTF CCM11580OATF CCM11512OATF CCM11532OATF
150 6” 20 3/4” 30 1.3/16” CCM15080CRTF CCM15012CRTF CCM15032CRTF CCM15080OATF CCM15012OATF CCM15032OATF

Características técnicas

Acabado Grado

Nylon Abrasivo Acabado Grado
Grano 20|40|60 Basto NA1
Grano 80|100|120 Medio NA2
Grano 180|200|300 Fino NA3
Grano 400|800|2000 S. Fino NA4
Fibras no abrasivas Neutro SW5

Capacidad de arranque

Nylon y Lijas
Grano 20|40|60
Grano 80|100|120
Grano 180|200|300
Grano 400|800|2000
Nylon no abrasivo

Flexibilidad

DLZ, Abanicos, Encapsulado
Retorcidos, Cepillo control
Ondulados 0,5 a 0,3
Ondulados 0,25 a 0,10
Ondulado 0,08 a 0,06, Nylones y fibras sintéticas
  • Acción: Acabado
  • Herramienta: Máquina industrial
  • Superficie: Ac.Inox./Aluminio, Acero
  • La gama TUFT se utiliza para infinidad de desbarbados, son cepillos con menor densidad que los descritos anteriormente. Los filamentos tienen más movilidad al existir espacio entre ellos.
  • Esta característica le aporta más flexibilidad para adaptarse a geometrías complejas.
  • Muy recomendables para máquina planetarias, ideal para el desbarbado de piezas planas.

Sectores

  • Industria: Ingeniería, Aeronáutica, Automoción, Metales Sinterizados.